The Easy Way to Use a Kopykake Projector

What do Kopykake projectors and Robert Downey Jr. have in common?  Nothing really, except that I kinda love them both.

Over the years I’ve made no secret of the affection I have for my Kopykake.  I mean, what’s not to like about a machine that can turn a five hour nightmare into a manageable two hour job?

It may surprise you to know that my KK and I didn’t start out on the best of terms.  When I ordered it, I was expecting a magic machine.  Talk about a disappointing surprise!  No one mentioned that it would take time and practice to learn how to effectively utilize it as a cookie decorating tool.

Long story short, I eventually learned to love the beast and we lived happily ever after.  Since then, I haven’t given our relationship much thought.  Then, a couple of weeks ago I shared a little template for One-Direction cookies, touching briefly using a Kopykake.  I was surprised at how well people liked the idea, so I decided it was worth a little more explanation.

Here is an in-depth look at how I approach cookie designs {like Iron Man} using a Kopykake projector.

Iron Man Cookies_SweetSugarBelle

Sometimes I begin with an existing cutter and with the help of my Kopykake, adapt the design to fit.  You can see a great example of that HERE.  In this case, however, the template was pretty straightforward so I decided to hand-cut .

Iron Man Cookies_Sweetsugarbelle1

Once the cookies were baked, I placed a  copy of the template into the Kopykake and adjusted it to fit the cookie.

Iron Man Cookies_Sweetsugarbelle2While most people use piping icing to outline the design before flooding, I prefer to add color first.   Using 20-second icing, I quickly filled each section until the base was covered.  The best part is, using this technique it’s not even necessary to allow drying time in-between steps.

Iron Man Cookies_Sweetsugarbelle3Since my images are often black and white {to conserve printer ink} my phone is often nearby to help me keep track of where each color should be.

Iron Man Cookies_Sweetsugarbelle4

I make sure the base is partially dry before moving on.

Iron Man Cookies_Sweetsugarbelle5

I also don’t worry too much about little boo boos like these since most of them end up covered with piping icing.

Iron Man Cookies_Sweetsugarbelle6

To finish up I placed the cookie back under the projector and use piping icing and a #1.5 tip to add the details.

Iron Man Cookies_Sweetsugarbelle7Remember I mentioned not worrying about perfection?  If you look closely, each cookie is a teensie bit different, but I promise that no one will notice…but you, of course.

Iron Man Cookies_Sweetsugarbelle8

On that note, I thought I would highlight out a few things to illustrate a point.  It’s in our nature as cookie decorators to be overly critical of our work, but in the grand scheme of things tiny imperfections aren’t really that big of a deal.

Iron Man Cookies_Sweetsugarbelle9

I’ve made cookie after cookie with great results using this method.  It cuts down on cratering, mixing time and decorating time, and leaves you with a very sharp, detailed design.

Iron Man Cookies_SweetSugarBelle11

Have you ever used your Kopykake in this way?  If not, try it sometime and let me know what you think.  If you don’t own a Kopykake, GET ONE NOW.  Try Jerry’s Artarama or Madison Art Shop for the best deals.

For more helpful Kopykake tips, check out these links:

Join The Discussion

*

Current ye@r *

Comments

  1. 31
    Rosanne Waldman says:

    There are different models of KK. Which do you recommend? I’m so anxious to buy one after reading your wonderful site!

  2. 32
    Caiti says:

    Ordering my KopyKake in the next few weeks!! I’ve been reading EV-ER-Y-THING I can on using it for cookies. Thanks for the tips!!

  3. 33
    Jennifer says:

    Hi- I’m wondering what color you used for iron mans face? I’m making these for a little boys bday but can’t figure out the face color. Any help would be appreciated. Thanks!

  4. 34
    Liz Lobdell says:

    I am so impressed with your work and that you share it! I have never decorated cookies like this and will be trying the UT Longhorn, not the hand. I will flood it like the hand on your tutorial. I hope all goes well and if it looks half as good as yours I will be happy. My daughter will be going to Texas Tech this fall, so I will try your TT cookies for her going away party. Unfortunately, I already made cookie dough from another website before I found your blog, but for the TT cookies I will try yours.

  5. 35

    Hi there!!!Aside from absolutely LOVING your work, I was checking the blog out specifically for some KopyKake info! I was thinking of getting one but was a little freaked out when I saw “projects on walls,” etc. That did not seem too useful for me. So I figured I should ask you…is there any particular model that is best suited for cookies? I noticed you use it quite a bit. I do more than cookies, but it appears to be a pretty useful tool! What are your recommendations? Thank you!!!

Trackbacks

  1. [...] For a little more info on how I made Charlie Brown and friends, check out this post on using a Kopykake projector. [...]

  2. [...] If you do happen to have a Kopykake, follow the cutting steps above and then finish up with a projector.  You can read about my favorite way to use a Kopykake HERE. [...]

  3. [...] The Easy Way to Use a Kopykake Projector [...]

  4. [...] The Easy Way to use a Kopykake [...]

  5. […] To make these simple #5 cookies I used a font called Creaky Frank and my Kopykake.  I simply downloaded the font, {you can skip this step by copying the image directly from the site} enlarged it,  and projected it onto the cookie.  For an in-depth explanation of the process, click here. […]